IF SAW Filter
Part Number Package Application Last Modified
821-SL45.0M-10C 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-SL45.0M-10C

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 44.9 45.0 45.1 MHz
Insertion Loss Fo - 12.6 15.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - 0 - +60 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 4.5 MHz - 0.45 1.00 dB
Group Delay Ripple Fo 4.5 MHz - 60 100 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -1 dB 9.80 9.88 - MHz
-3 dB - 10.40 -
-20 dB - 11.88 -
-40 dB - 12.80 13.00
Absolute Delay Fo - 1.51 - usec
Ultimate Rejection - - 45 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-SL45.0M-10C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map