IF SAW Filter
Part Number Package Application Last Modified
821-IF190.0M-26A 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-IF190.0M-26A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 190.0 - MHz
Insertion Loss Fo - 29.90 31.50 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -10 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 12.5 MHz - 0.45 1.00 dB
Group Delay Ripple Fo 12.5 MHz - 25 50 nsec
Temperature Coefficient - - -20 - ppm/C
Bandwidth -1 dB 26.20 26.45 - MHz
-3 dB - 26.85 -
-40 dB - 28.55 28.70
-50 dB - 28.75 -
Absolute Delay Fo - 2.52 - usec
Ultimate Rejection - 50 55 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-IF190.0M-26A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map