IF SAW Filter
Part Number Package Application Last Modified
821-IF184.0M-10A 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-IF184.0M-10A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 184.0 - MHz
Insertion Loss Fo - 27.0 28.5 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - 0 - +70 C
Storage Temperature - -45 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 5.25 MHz - 0.55 1.00 dB
Group Delay Ripple Fo 5.25 MHz - 35 80 nsec
Temperature Coefficient - - -18 - ppm/C
Bandwidth -1 dB 10.00 10.82 - MHz
-3 dB - 11.20 -
-40 dB - 12.65 12.90
Absolute Delay Fo - 2.59 - usec
Relative Attenuation Fo 6.5 MHz 45 55 - dB 
Ultimate Rejection - 45 50 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-IF184.0M-10A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map