IF SAW Filter
Part Number Package Application Last Modified
821-SL145.0M-26A 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-SL145.0M-26A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 145.0 - MHz
Insertion Loss Fo - 17.6 21.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -10 - +70 C
Storage Temperature - -30 - +80 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 12.48 MHz - 0.42 0.90 dB
Group Delay Ripple Fo 12.48 MHz - 45 70 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -1 dB 26.50 27.05 - MHz
-10 dB - 28.78 28.96
-20 dB - 29.65 -
-40 dB - 30.90 -
Absolute Delay Fo - 1.05 - usec
Ultimate Rejection - - 42 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-SL145.0M-26A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map