IF SAW Filter
Part Number Package Application Last Modified
821-IF135.0M-10A 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-IF135.0M-10A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 135.0 - MHz
Insertion Loss Fo - 25.7 27.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - 0 - +60 C
Storage Temperature - -30 - +80 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 4.42 MHz - 0.75 1.00 dB
Group Delay Ripple Fo 4.42 MHz - 45 100 nsec
Temperature Coefficient - - -18 - ppm/C
Bandwidth -1 dB - 10.15 - MHz
-3 dB - 10.50 -
-40 dB - 11.85 -
Absolute Delay Fo - 3.08 - usec
Ultimate Rejection - - 52 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-IF135.0M-10A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map