IF SAW Filter
Part Number Package Application Last Modified
821-IF133.5M-26D 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-IF133.5M-26D

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 133.5 - MHz
Insertion Loss Fo - 23.50 25.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - 0 - +70 C
Storage Temperature - -30 - +80 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 12.5 MHz - 0.75 1.20 dB
Group Delay Ripple Fo 12.5 MHz - 40 80 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 25.00 26.20 - MHz
-10 dB - 27.15 27.30
-20 dB - 27.60 27.80
-30 dB - 27.90 28.10
-45 dB - 28.25 -
Absolute Delay Fo - 1.92 - usec
Ultimate Rejection - - 50 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-IF133.5M-26D

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map