IF SAW Filter
Part Number Package Application Last Modified
821-IF119.6875M-09A 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-IF119.6875M-09A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 119.5675 119.6875 119.8075 MHz
Insertion Loss Fo - 24.5 27.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 4.6875 MHz - 0.50 1.00 dB
Group Delay Ripple Fo 4.6875 MHz - 35 100 nsec
Temperature Coefficient - - -20 - ppm/C
Bandwidth -1 dB 9.375 9.830 - MHz
-30 dB - 11.250 -
-40 dB - 11.400 12.100
Absolute Delay Fo - 3.24 - usec
Relative Attenuation Fo 5.9125 MHz 30 60 - dB 
Ultimate Rejection - - 50 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-IF119.6875M-09A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map