IF SAW Filter
Part Number Package Application Last Modified
821-IF115.0M-16A 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-IF115.0M-16A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 115.0 - MHz
Insertion Loss Fo - 20.5 23.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -5 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 7.5 MHz - 0.55 1.00 dB
Group Delay Ripple Fo 7.5 MHz - 46 80 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 15.80 16.02 - MHz
-3 dB - 16.47 -
-40 dB - 18.34 18.50
Absolute Delay Fo - 1.68 - usec
Ultimate Rejection - 50 53 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-IF115.0M-16A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map