IF SAW Filter
Part Number Package Application Last Modified
821-IF115.0M-07B 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-IF115.0M-07B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 114.90 115.00 115.10 MHz
Insertion Loss Fo - 24.0 26.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple - - 0.72 1.00 dB
Group Delay Ripple - - 50.0 100.0 nsec
Temperature Coefficient - - -20 - ppm/C
Bandwidth -1 dB 7.50 7.54 - MHz
-10 dB - 8.24 8.32
-20 dB - 8.55 -
-40 dB - 8.87 -
Absolute Delay Fo - 3.02 - usec
Ultimate Rejection - 45 50 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-IF115.0M-07B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map