IF SAW Filter
Part Number Package Application Last Modified
821-IF109.5M-20A 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-IF109.5M-20A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 109.5 - MHz
Insertion Loss Fo - 21.37 25.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - 0 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 9.22 MHz - 0.45 1.00 dB
Group Delay Ripple Fo 9.22 MHz - 40 80 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 20.00 20.35 - MHz
-10 dB - 21.40 21.80
-20 dB - 21.90 22.20
-30 dB - 22.20 22.50
-45 dB - 22.50 -
Absolute Delay Fo - 1.89 - usec
Ultimate Rejection - - 50 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-IF109.5M-20A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map