IF SAW Filter
Part Number Package Application Last Modified
820-SL70.0M-40A 20.2 x 12.6 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
820-SL70.0M-40A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 69.8 70.0 70.2 MHz
Insertion Loss Fo - 20.7 22.5 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 17.5 MHz - 0.5 1.0 dB
Group Delay Ripple Fo 17.5 MHz - 18 30 nsec
Temperature Coefficient - - -72 - ppm/C
Relative Attenuation Lower Sidelobe 48 52 - dB 
Upper Sidelobe 25 32 -
Absolute Delay Fo - 0.89 - usec
Bandwidth -1 dB 39.0 39.7 - MHz
-3 dB 40.0 40.8 -
-40 dB - 46.8 48.5
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
820-IF70.0M-40A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map