IF SAW Filter
Part Number Package Application Last Modified
820-SL70.0M-06 20.2 x 12.6 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
820-SL70.0M-06

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 69.8 70.0 70.2 MHz
Insertion Loss Fo - 8.2 9.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 2.1 MHz - 0.7 1.0 dB
Group Delay Ripple Fo 2.0 MHz - 110 150 nsec
Temperature Coefficient - - -94 - ppm/C
Relative Attenuation 10.0 ~ 64.5MHz 40 45 - dB 
75.5 ~ 140.0MHz 40 43 -
Absolute Delay Fo - 0.85 - usec
Bandwidth -1.0 dB 5.2 5.6 - MHz
-3.0 dB 6.0 6.5 -
-40.0 dB - 9.5 10.0
IN/OUT Return Loss Fo - - - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
820-SL70.0M-06

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map