IF SAW Filter
Part Number Package Application Last Modified
820-IF70.0M-05B 20.2 x 12.6 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
820-IF70.0M-05B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 69.92 70.00 70.08 MHz
Insertion Loss Fo - 21.6 24.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple - - 0.50 0.95 dB
Group Delay Ripple - - 47 100 nsec
Temperature Coefficient - - -20 - ppm/C
Absolute Delay Fo - 2.92 - usec
Bandwidth -1 dB 5.0 5.28 - MHz
-3 dB - 5.68 -
-40 dB - 7.39 7.50
Ultimate Rejection - 50 55 - -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
820-IF70.0M-05B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map