IF SAW Filter
Part Number Package Application Last Modified
820-IF62.5M-19C 20.2 x 12.6 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
820-IF62.5M-19C

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 62.4 62.5 62.6 MHz
Insertion Loss - - 23.0 25.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 9.90 MHz - 0.5 1.0 dB
Group Delay Variation Fo 9.90 MHz - 30 100 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 20.00 20.27 - MHz 
-3 dB - 20.73 -
-10 dB - 21.46 -
-40 dB - 22.58 22.70
Absolute Delay Fo - 1.83 - usec

Attenuation Rejection

Lower Sidelobe 48 52 - dB
Upper Sidelobe 48 52 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
820-IF62.5M-19C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map