IF SAW Filter
Part Number Package Application Last Modified
820-IF62.50M-19B 20.2 x 12.6 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
820-IF62.5M-19B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 62.5 - MHz
Insertion Loss Fo - 22.3 24.5 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -25 - +75 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 9.22 MHz - 0.35 1.00 dB
Group Delay Ripple Fo 9.22 MHz - 40 70 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1.0 dB - 19.50 - MHz 
-3.0 dB 19.90 20.00 -
-40.0 dB - 21.93 22.10
Absolute Delay Fo - 1.84 - usec
Attenuation Rejection Lower Sidelobe 50 55 - dB
Upper Sidelobe 50 55 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
820-IF62.5M-19B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map