IF SAW Filter
Part Number Package Application Last Modified
820-IF62.50M-14A 20.2 x 12.6 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
820-IF62.5M-14A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 62.4 62.5 62.6 MHz
Insertion Loss Fo - 21.70 23.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 6.86 MHz - 0.6 1.0 dB
Group Delay Ripple Fo 6.86 MHz - 36 100 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 14.50 14.60 - MHz 
-3 dB - 14.96 -
-30 dB - 16.21 -
-40 dB - 16.38 16.50
Absolute Delay Fo - 2.0 - usec
Relative Attenuation Lower Sidelobe 50 52 - dB
Upper Sidelobe 50 52 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
820-IF62.5M-14A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map