IF SAW Filter
Part Number Package Application Last Modified
820-IF260.0M-30B 20.2 x 12.6 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
820-IF260.0M-30B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 260.0 - MHz
Insertion Loss Fo - 30.5 32.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 14.52 MHz - 0.7 1.1 dB
Group Delay Ripple Fo 14.52 MHz - 42 70 nsec
Temperature Coefficient - - -18 - ppm/C
Bandwidth -1 dB 30.00 30.25 - MHz
-3 dB 30.40 30.55 -
-40 dB - 31.90 32.00
-50 dB - 32.06 -
Absolute Delay Fo - 2.84 - usec
Ultimate Rejection - 50 55 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
820-IF260.0M-30B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map