IF SAW Filter
Part Number Package Application Last Modified
820-IF260.0M-29A 20.2 x 12.6 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
820-IF260.0M-29A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 260.0 - MHz
Insertion Loss Fo - 31.70 - dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 14.32MHz - 0.7 1.0 dB
Group Delay Ripple Fo 14.32 MHz - 43 80 nsec
Temperature Coefficient - - -18 - ppm/C
Bandwidth -1 dB 29.40 29.61 - MHz
-3 dB - 29.92 -
-40 dB - 31.23 31.40
Absolute Delay Fo - 2.83 - usec
Ultimate Rejection - 50 53 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
820-IF260.0M-29A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map