IF SAW Filter
Part Number Package Application Last Modified
820-IF120.0M-15A 20.2 x 12.6 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
820-IF120.0M-15A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 120.0 - MHz
Insertion Loss Fo - 21.6 23.5 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 7.47MHz - 0.58 1.00 dB
Group Delay Ripple Fo 7.47 MHz - 48 80 nsec
Temperature Coefficient - - -72 - ppm/C
Absolute Delay Fo - 2.22 2.50 usec
Bandwidth -1 dB 15.20 15.48 - MHz
-3 dB - 15.74 -
-40 dB - 17.14 17.30
Ultimate Rejection - 50 55 - -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
820-IF120.0M-15A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map