IF SAW Filter
Part Number Package Application Last Modified
820-IF120.0M-04A 20.2 x 12.6 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
820-IF120.0M-04A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 120.0 - MHz
Insertion Loss Fo - 21.20 23.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 1.92 MHz - 0.35 1.00 dB
Group Delay Ripple Fo 1.92 MHz - 70 150 nsec
Temperature Coefficient - - -0.03 - ppm/C
Relative Attenuation Lower Sidelobe 47 52 - dB 
Upper Sidelobe 47 52 -
Absolute Delay Fo - 2.47 - usec
Bandwidth -1 dB 4.00 4.20 - MHz
-3 dB - 4.50 -
-25 dB - 5.33 5.50
-40 dB - 5.58 5.70
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
820-IF120.0M-04A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map