IF SAW Filter
Part Number Package Application Last Modified
819-IF153.0M-A 19 x 6.5 SMD Base Station & Repeater January 2011

PART NUMBER :
819-IF153.0M-A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 153.50 153.60 153.70 MHz
Insertion Loss Fo - 19.0 20.0 dB
Maximum DC Voltage - - - 30 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Phase Linearity - - 5.0 7.0 deg
Group Delay Variation - - 190 220 nsec
Ambient Temperature - - 25 - C
Bandwidth -1 dB 1.8 2.0 - MHz 
-3 dB 2.1 2.3 -
-40 dB - 3.3 3.5
Absolute Delay Fo - 2.2 - usec
Ultimate Rejection - 40 45 - dB
Passband Ripple Variation - - 0.45 0.60 dB
Substrate Material - - Qz - -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, E, G, H, I, J Ground
A In
F Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
819-IF153.0M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map