IF SAW Filter
Part Number Package Application Last Modified
813-SL70.0M-05B 13.3 x 6.5 SMD IF SAW Filter June 2012

PART NUMBER :
813-SL70.0M-05B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 69.8 70.0 70.2 MHz
Insertion Loss Fo - 9.2 10.5 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 2.1 MHz - 0.6 1.0 dB
Group Delay Ripple Fo 2.1 MHz - 80 200 nsec
Temperature Coefficient - - -84 - ppm/C
Bandwidth -1 dB 5.00 5.30 - MHz 
-3 dB 5.50 5.80 -
-40 dB - 7.85 8.20
Absolute Delay Fo - 1.30 - usec
Relative Attenuation 10 ~ 64 MHz 40 45 - dB
76 ~ 140 MHz 40 42 -
IN/OUT Return Loss Fo - - - dB
* With network. Reference PDF spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL70.0M-05B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map