IF SAW Filter
Part Number Package Application Last Modified
815-IF43.5M-C 15.9 x 5.9 Thru Hole Digital Broadcasting January 2012

PART NUMBER :
815-IF43.5M-C

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 43.5 - MHz
Insertion Loss Fo MHz - 23.5 26.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Variation - - 0.6 1.0 dB
Group Delay Variation - - 80 - nsec
Temperature Coefficient - - -72 - ppm/C
Relative Attenuation Picture Carrier 45.75 MHz -1.3 -0.3 0.7 dB
- 46.50 MHz 0.6 1.4 2.6
Sound Carrier 41.25 MHz -1.2 0.4 0.8
Adj. Picture Carrier 39.75 MHz 30.0 38.0 -
Adj. Sound Carrier 47.25 MHz 30.0 38.0 -
Lower Sidelobe 35.00 ~ 38.25 MHz 30.0 36.0 -
Upper Sidelobe 47.75 ~ 55.00 MHz 30.0 31.5 -
Reflected Wave Signal Suppression 40 48 -
Feedthrough Signal Suppression - 43 -
* With network. Reference PDF spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
815-IF43.5M-C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map