IF SAW Filter
Part Number Package Application Last Modified
813-SL140.0M-10B 13.3 x 6.5 SMD IF SAW Filter June 2012

PART NUMBER :
813-SL140.0M-10B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 139.85 140.00 140.15 MHz
Insertion Loss Fo - 13.6 15.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation - - 0.4 1.0 dB
Group Delay Variation - - 64 100 nsec
Temperature Coefficient - - -20 - ppm/C
Bandwidth -1 dB 9.1 9.3 - MHz 
-3 dB 9.9 10.1 -
-40 dB - 12.9 13.1
-45 dB - 13.2 14.0
Absolute Delay Fo - 0.97 - usec
Relative Attenuation Lower Sidelobe 45 48 - dB
Upper Sidelobe 41 45 -
* With network. Reference PDF spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL140.0M-10B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map