IF SAW Filter
Part Number Package Application Last Modified
813-IF92.16M-01A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-IF92.16M-01A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 92.160 - MHz
Insertion Loss Fo - 20.0 22.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Variation Fo 0.768 MHz - 0.3 0.8 dB
Group Delay Variation Fo 0.768 MHz - 45 100 nsec
Temperature Coefficient - - -0.03 - ppm/C
Bandwidth -1 dB 1.90 2.06 - MHz 
-30 dB - 3.44 3.50
Absolute Delay Fo - 1.73 - usec
Relative Attenuation Fo + 1.75 - 32 - dB
Fo - 1.75 - 34 -
Ultimate Rejection Level - 45 50 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-IF92.16M-01A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map