IF SAW Filter
Part Number Package Application Last Modified
813-SL75.0M-40F 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL75.0M-40F

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 75.0 - MHz
Insertion Loss Fo - 21.40 24.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Attenuation Fo 19.60 MHz - 0.45 0.80 dB
55.4 ~ 60.4 - 0.30 0.40
Group Delay Variation Fo 19.60 MHz - 12 35 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -1 dB - 41.30 - MHz 
-3 dB 41.90 42.30 -
-20 dB - 44.90 45.20
-40 dB - 46.10 46.70
Absolute Delay Fo - 0.99 - usec
Ultimate Rejection - - 45 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL75.0M-40F

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map