IF SAW Filter
Part Number Package Application Last Modified
813-SL75.0M-14A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL75.0M-14A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 75.0 - MHz
Insertion Loss Fo - 13.90 16.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Variation Fo 9.875 MHz - 0.34 0.90 dB
Group Delay Variation Fo 6.875 MHz - 40 80 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -1 dB - 14.83 - MHz 
-3 dB - 15.39 -
-40 dB - 18.00 -
Absolute Delay Fo - 1.3 - usec
Ultimate Rejection - 40 47 - dB
VSWR - - 3 - -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:

813-SL75.0M-14A


Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map