IF SAW Filter
Part Number Package Application Last Modified
813-IF70.0M-26B 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-IF70.0M-26B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 70.0 - MHz
Insertion Loss Fo - 31.1 32.5 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -10 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 12.48 MHz - 0.63 1.00 dB
Group Delay Variation Fo 12.48 MHz - 26 50 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 25.60 25.76 - MHz 
-3 dB - 26.33 -
-40 dB - 28.74 28.90
Absolute Delay Fo - 1.51 - usec
Ultimate Rejection - 42 47 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-IF70.0M-26B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map