IF SAW Filter
Part Number Package Application Last Modified
813-SL66.6M-02A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL66.6M-02A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 66.5 66.6 66.7 MHz
Insertion Loss Fo - 12.5 15.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -5 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 0.9 MHz - 0.1 0.5 dB
Group Delay Variation Fo 0.9 MHz - 23 50 nsec
Temperature Coefficient - - -20 - ppm/C
Bandwidth -1 dB 1.8 2.88 - MHz 
-3 dB - 3.38 -
-40 dB - 5.36 5.60
Absolute Delay Fo - 1.38 - usec
Ultimate Rejection - 40 48 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL66.6M-02A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map