IF SAW Filter
Part Number Package Application Last Modified
813-IF65.0M-29C 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-IF65.0M-29C

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 65.0 - MHz
Insertion Loss Fo - 31.6 33.5 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Variation Fo 14.32 MHz - 0.3 1.0 dB
Group Delay Variation Fo 14.32MHz - 35 70 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 29.05 29.19 - MHz 
-3 dB - 29.68 -
-40 dB - 31.96 32.10
Absolute Delay Fo - 1.74 - usec
Ultimate Rejection - 40 43 - -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-IF65.0M-29C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map