IF SAW Filter
Part Number Package Application Last Modified
813-SL65.8M-06A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL65.8M-06A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 65.7 65.8 65.9 MHz
Insertion Loss Fo - 16.5 18.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - 15 25 35 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 3.0MHz - 0.30 0.80 dB
Group Delay Variation Fo 3.0 MHz - 50 100 nsec
Temperature Coefficient - - -18 - ppm/C
Bandwidth -1 dB 6.40 6.60 - MHz 
-3 dB - 7.00 -
-20 dB - 8.10 -
-40 dB - 9.10 9.50
Absolute Delay Fo - 1.68 - usec
Relative Attenuation 70.44 MHz ~ 70.94 MHz 20 35 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL65.8M-06A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map