IF SAW Filter
Part Number Package Application Last Modified
813-SL62.5M-06B 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL62.5M-06B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 62.42 62.50 62.58 MHz
Insertion Loss Fo - 11.8 14.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - 0 - +60 C
Storage Temperature - -30 - +80 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 3.0 MHz - 0.40 1.00 dB
Group Delay Variation Fo 3.0 MHz - 65 130 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -1 dB 6.00 6.55 - MHz 
-3 dB - 7.10 -
-40 dB - 9.34 10.00
Absolute Delay - - 1.25 - dBm
Ultimate Rejection - 40 45 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL62.5M-06B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map