IF SAW Filter
Part Number Package Application Last Modified
813-SL62.5M-05A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL62.5M-05A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 62.40 62.50 62.60 MHz
Insertion Loss Fo - 15.20 17.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +75 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 2.40 MHz - 0.40 0.90 dB
Group Delay Variation Fo 2.40 MHz - 48 80 nsec
Temperature Coefficient - - -18 - ppm/C
Bandwidth -1 dB 5.00 5.23 - MHz 
-3 dB

5.50

5.70 -
-40 dB - 7.65 7.80
Absolute Delay Fo - 1.68 1.80 usec
Ultimate Rejection - 40 47 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL62.5M-05A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map