IF SAW Filter
Part Number Package Application Last Modified
813-SL60.0M-22A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL60.0M-22A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 59.90 60.00 60.10 MHz
Insertion Loss Fo - 16.40 18.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 9.22 MHz - 0.21 0.80 dB
Group Delay Variation Fo 9.22 MHz - 10 30 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -1 dB - 22.44 - MHz 
-3 dB 23.50 23.98 -
-30 dB - 29.33 -
-40 dB - 30.38 30.70
Absolute Delay Fo - 0.68 - dBm
Ultimate Rejection - 40 45 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL60.0M-22A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map