IF SAW Filter
Part Number Package Application Last Modified
813-SL60.0M-20B 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL60.0M-20B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 60.0 - MHz
Insertion Loss Fo - 14.6 16.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - 0 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 9.22 MHz - 0.4 1.0 dB
Group Delay Variation Fo 9.22 MHz - 30 80 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -1 dB 18.44 20.05 - MHz 
-10 dB - 21.95 22.50
-20 dB - 22.75 23.10
-30 dB - 23.35 23.70
-40 dB - 24.00 -
Absolute Delay - - 1.34 - usec
Ultimate Rejection - 40 45 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL60.0M-20B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map