IF SAW Filter
Part Number Package Application Last Modified
813-SL60.0M-10 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL60.0M-10

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 60.0 - MHz
Insertion Loss Fo - 10.5 12.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Varation - - 0.6 1.0 dB
Group Delay Variation - - 80 150 nsec
Temperature Coefficient - - -94 - ppm/C
Bandwidth -1 dB 10.0 10.3 - MHz 
-3 dB - 11.0 -
-40 dB - 13.5 14.0
Absolute Delay Fo - 1.1 - usec
Relative Attenuation 10.0 ~ 52.5 MHz 40 - - dB
67.5 ~ 120.0MHz 40 - -
IN/OUT Return Loss Fo - - - -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL60.0M-10

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map