IF SAW Filter
Part Number Package Application Last Modified
813-SL48.0M-10A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL48.0M-10A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 48.0 - MHz
Insertion Loss Fo - 13.5 16.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 2000 - ohm
Amplitude Ripple Fo 4.25 MHz - 0.6 1.2 dB
Group Delay Variation Fo 4.5 MHz - 120 220 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -1 dB 9.00 10.10 - MHz 
-3 dB - 10.50 -
Absolute Delay Fo - 1.55 - usec
Relative Attenuation (ref: Max IL) Fc 5.5 MHz - 5.5 - dB
Fc 7.75 MHz 35 43 -
Fc 10.0 MHz 40 53 -
Fc +15.0 ~ 25.0 MHz 40 52 -
Fc -15.0 ~25.0 MHz 40 68 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, G, H, I, J Ground
K Input +
L Input -
E Output +
F Output -

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL48.0M-10A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map