IF SAW Filter
Part Number Package Application Last Modified
813-SL45.0M-13A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL45.0M-13A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 44.92 45.0 45.08 MHz
Insertion Loss Fo - 18.0 20.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +75 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Absolute Delay Fo - 1.61 - usec
Group Delay Variation - - 40 90 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -1 dB - 13.85 - MHz 
-3 dB 14.50 14.60 -
-40 dB - 18.10 18.50
Passband Ripple Variation - - 0.70 1.0 dB
Ultimate Rejection - - 45 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL45.0M-13A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map