IF SAW Filter
Part Number Package Application Last Modified
813-IF380.0M-04A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-IF380.0M-04A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 379.80 380.00 380.20 MHz
Insertion Loss Fo - 20.5 23.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation - - 0.55 1.00 dB
Group Delay Variation - - 85 150 nsec
Temperature Coefficient - - -0.03 - ppm/C
Bandwidth -1 dB 4.00 4.10 - MHz 
-3 dB 4.30 4.57 -
-40 dB - 6.20 6.50
Absolute Delay Fo - 1.45 - usec
Relative Attenuation Lower Sidelobe 45 50 - dB
Upper Sidelobe 45 50 -
Phase Linearity Variation - - 5.2 10.0 deg
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-IF380.0M-04A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map