IF SAW Filter
Part Number Package Application Last Modified
813-IF38.912M-E 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-IF38.912M-E

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 38.912 - MHz
Insertion Loss Fo - 17.0 19.0 dB
Maximum DC Voltage - - - - V
Maximum Input Power - - - - dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50/2000 - ohm
Load Impedance single ended * - 50/2000 - ohm
Bandwidth -3 dB - 1.5 - MHz
-30 dB - 2.5 -
Group Delay Variation - - 80 200 nsec
Temperature Coefficient - - -20 - ppm/C
Relative Attenuation 30.00 ~ 36.26 MHz 40 45 - dB 
36.26 ~ 37.30 MHz 40 48 -
40.60 ~ 41.40 MHz 40 48 -
41.40 ~ 50.00 MHz 40 50 -
Absolute Delay Fo - 1.36 - usec
Bandwidth -3 dB - 1.5 - MHz
-30 dB - 2.7 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, G, H, I, J Ground
K, L In
E, F Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-IF38.912M-E

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map