IF SAW Filter
Part Number Package Application Last Modified
813-SL32.0M-03A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL32.0M-03A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 32.0 - MHz
Insertion Loss Fo - 12.5 15.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Varation - - 0.5 1.0 dB
Group Delay Variation - - 70 150 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -1 dB - 2.7 - MHz 
-3 dB 3.0 3.4 -
-30 dB - 5.5 5.9
Absolute Delay - - 1.28 - usec
Relative Attenuation Lower Sidelobe - 45 - dB
Upper Sidelobe - 45 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL32.0M-03A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map