IF SAW Filter
Part Number Package Application Last Modified
813-IF187.5M-65A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-IF187.5M-65A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 187.5 - MHz
Insertion Loss Fo - 28.5 31.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 32.4 MHz - 0.58 1.00 dB
Group Delay Variation Fo 32.4 MHz - 13 35 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 65.40 65.52 - MHz 
-3 dB - 66.68 -
-40 dB - 71.00 72.00
Absolute Delay Fo - 0.90 - usec
Ultimate Rejection 10 MHz ~ 147.5 MHz 48 50 - dB
227.5 MHz ~ 540 MHz 48 50 -
540 MHz ~ 600 MHz 43 45 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-IF187.5M-65A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map