IF SAW Filter
Part Number Package Application Last Modified
813-IF162.3M-12A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-IF162.3M-12A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 162.3 - MHz
Insertion Loss Fo - 25.5 27.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -5 - +65 C
Storage Temperature - -30 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 6.00 MHz - 0.50 - dB
Group Delay Variation Fo 6.00 MHz - 20 50 nsec
Temperature Coefficient - - -23 - ppm/C
Bandwidth -1 dB 12.50 12.65 - MHz 
-3 dB - 13.15 -
-25 dB - 14.80 -
-40 dB - 15.25 15.60
Absolute Delay Fo - 2.16 - usec
Relative Attenuation Lower Sidelobe 50 55 - dB
Upper Sidelobe 50 55 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-IF162.3M-12A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map