IF SAW Filter
Part Number Package Application Last Modified
813-IF160.0M-04A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-IF160.0M-04A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 159.85 160.00 160.15 MHz
Insertion Loss Fo - 21.0 22.5 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Variation - - 0.45 1.00 dB
Group Delay Variation - - 45 100 nsec
Temperature Coefficient - - -18 - ppm/C
Bandwidth -1 dB 4.40 4.54 - MHz 
-3 dB - 5.30 -
-40 dB - 7.98 8.30
Absolute Delay Fo - 1.62 - usec
Relative Attenuation Lower Sidelobe 50 55 - dB
Upper Sidelobe 50 55 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-IF160.0M-04A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map