IF SAW Filter
Part Number Package Application Last Modified
813-SL156.0M-40A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL156.0M-40A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 156.0 - MHz
Insertion Loss Fo - 17.0 18.5 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 20.0 MHz - 0.35 0.80 dB
Group Delay Variation Fo 20.0 MHz - 15 35 nsec
Temperature Coefficient - - -86 - ppm/C
Relative Attenuation 10MHz ~ 114MHz 40 55 - dB 
199MHz ~ 239MHz 40 52 -
239MHz ~ 410MHz 40 45 -
Absolute Delay Fo - 0.65 - usec
Bandwidth -1.0 dB 44.00 45.43 - MHz
-40.0 - 53.70 55.00
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL156.0M-40A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map