IF SAW Filter
Part Number Package Application Last Modified
813-SL147.0M-10B 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL147.0M-10B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 146.8 147.0 147.2 MHz
Insertion Loss Fo - 8.2 11.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - 0 - +80 C
Storage Temperature - -40 - +55 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 4.75 MHz - 0.6 1.0 dB
Group Delay Variation Fo 4.75 MHz - 60 100 nsec
Temperature Coefficient - - -89 - ppm/C
Bandwidth -1 dB 9.6 10.5 - MHz 
-3 dB 10.6 11.4 -
-35 dB - 15.2 16.0
Absolute Delay Fo - 0.91 - usec
Relative Attenuation Lower Sidelobe 45 50 - dB
Upper Sidelobe 45 50 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL147.0M-10B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map