IF SAW Filter
Part Number Package Application Last Modified
813-SL140.0M-77A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL140.0M-77A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 139.75 140.00 140.25 MHz
Insertion Loss Fo - 22.5 25.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +80 C
Storage Temperature - -45 - +105 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Variation Fo 35.0 MHz - 0.45 1.00 dB
Group Delay Variation Fo 35.0 MHz - 14 40 nsec
Material Temperature Coefficient - - -13.16 - KHz/C
Bandwidth -2 dB 75.0 77.3 - MHz 
-3 dB 76.0 77.9 -
-35 dB - 84.3 85.0
Absolute Delay Fo - 0.78 - usec
Ultimate Rejection Fo 40 MHz - 7.4 - dB
Fo 50 MHz 40 53 -
ESD Class - - 1A - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL140.0M-77A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map