IF SAW Filter
Part Number Package Application Last Modified
813-IF140.0M-141A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-IF140.0M-141A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 140.0 - MHz
Insertion Loss Fo - 18.0 21.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - 30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 6.875 MHz - 0.6 1.0 dB
Group Delay Variation Fo 6.875 MHz - 50 100 nsec
Temperature Coefficient - - -23 - ppm/C
Bandwidth -1 dB - 14.8 - MHz 
-3 dB 15.0 15.5 -
-40 dB - 18.5 19.0
Absolute Delay Fo - 0.88 - usec
Relative Attenuation Lower Sidelobe 42 48 - dB
Upper Sidelobe 40 45 -
Fc -8.5 MHz - 15 -
Fc +8.5 MHz - 9 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-IF140.0M-141A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map