IF SAW Filter
Part Number Package Application Last Modified
813-SL138.24M-20A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL138.24M-20A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 138.24 - MHz
Insertion Loss Fo - 10.2 12.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 128.24 ~ 148.24 MHz - 0.5 1.0 dB
Group Delay Variation Fo 128.24 ~ 148.24 MHz - 26.8 50.0 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -1 dB - 21.95 - MHz 
-3 dB - 23.23 -
-40 dB - 28.25 30.00
Absolute Delay Fo - 0.85 - usec
Relative Attenuation @ 0 MHz ~ 108.24 MHz 58 60 - dB   
@ 108.24 MHz ~ 117.52MHz 52 56 -
@ 122.88 MHz 45 60 -
@ 220.4 MHz ~ 271.12MHz 58 80 -
@ 271.12 MHz ~ 1000.0 MHz 40 60 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL138.24M-20A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map