IF SAW Filter
Part Number Package Application Last Modified
813-IF136.25M-02A 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-IF136.25M-02A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 136.25 - MHz
Insertion Loss Fo - 18.5 21.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - 0 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Variation Fo 0.75 MHz - 0.4 1.0 dB
Group Delay Variation Fo 0.75 MHz - 90 150 nsec
Temperature Coefficient - - -0.03 - ppm/C
Bandwidth -1 dB 1.50 2.05 - MHz 
-3 dB - 2.35 -
-40 dB - 3.65 4.20
Absolute Delay Fo - 1.70 - usec
Relative Attenuation Lower Sidelobe 50 55 - dB 
Upper Sidelobe 50 55 -
Fo 2.75 MHz 55 60 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-IF136.25M-02A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map